Spectrosys Alarm unit Floalarm A6
Product Features
- 10 channel alarm unit with Modbus connection for monitoring gas pressure
- Indication of pressure values with alarm function
- TFT 4,3” colour touch screen display
- Suitable for transducers according to NAMURspecification (e.g. inductive sensors)
- All channels are individually programmable as normally closed or normally open contact
- Delay mode (1 sec.) is integrated for all channels
- Potential-free output as normally closed or normally open
- Modbus TCP/IP over RJ45 interface integrated e.g. useful for a connection to a BMS
- Two RS485 interfaces integrated
- Visible alarm (LEDs integrated in keypad)
- Acoustic alarm (integrated piezo buzzer)
- In case of disconnection (cut wires) or malfunction of the inputs (default), an acoustic alarm will occur
- Plastic housing for wall mounting
- Device in compliance with 93/42/EEC
Technical Data
Housing
Protection class: IP 66
Dimensions (WxHxD): 200 x 120 x 60 mm
Dimensions (WxHxD): 200 x 120 x 60 mm
Compatibility inputs
- mechanical switches
- electr. switches PNP/NPN (DC only)
- inductive switches type NAMUR
- electr. switches PNP/NPN (DC only)
- inductive switches type NAMUR
Potential free output
Max. switchable voltage: 24 V AC
Max. switchable load: 1 A
Configurable as: NO / NC
Max. switchable load: 1 A
Configurable as: NO / NC
Power supply voltage
100-240 V / 50-60 Hz
Max. power input: 5 W
Max. power input: 5 W
NAMUR-specification
Voltage: 5 V DC - 25 V DC
Power input inactive: IL < 1 mA
Power input activated: 3 mA < IL < 15 mA
Power input inactive: IL < 1 mA
Power input activated: 3 mA < IL < 15 mA
Communication parameters
Baud rate: 9600
Polarity: 2 bit stop 8N
Function code: 0x03 Read Holding
Polarity: 2 bit stop 8N
Function code: 0x03 Read Holding
Downloads
spectrosys
