Intended use
The intended use of the High pressure panel BM50-1+2 is the distribution of a gas from a gas source without a reduction in pressure.
High pressure panels of type BM50-1+2 are suitable for flammable gases, non-flammable gases, non-corrosive gases and for oxygen up to gas quality 6.0.
The permissible gas types and pressure ranges are each specified on the label (see "Identification / label").
With the two-sided version, the user can open and close the HPI valves on each side depending on which side is to supply the gas and which is to be the reserve side (manual switching panel).
The High pressure panel is equipped with a process gas valve and an exhaust gas valve on each side.
The equipment versions of the High pressure panels without electrical components may be used in an explosion hazard zone as they do not have separate ignition sources (ignition hazard assessment according to DIN EN ISO 80079-36).
High pressure panels with electrical components that are suitable for use in an explosion hazard zone are marked on the label according to EU Directive 2014/34/EU.
To be able to use the High pressure panels as intended, all persons working with it must comply with the specifications of the relevant user manual.
The area in which hazards can occur when used as intended is the area around the High pressure panels. The danger zone changes depending on the system status and use.